Smoothskin bare, Руководство пользователя

Страница: 16 / 31

19
4.1 GETTING STARTED
1. Before using SMOOTHSKIN BARE,
prepare the area to be treated by
making sure it is shaved (making
sure to remove all visible hair
prior to every treatment), cleaned
and dried. Any hairs remaining
above the surface of the skin may
damage the front of your device and could cause an
adverse reaction.
Remember, don’t use any gels or creams with this
device!
2. Power on the device.
Plug the power supply in using the cable provided.
The skin tone sensor on the front of the handset
will illuminate blue and the fan will start up.
Don’t wax, epilate
or pluck the hair
in the treatment
area, as this
will remove the
hair shaft that
absorbs the light
energy during
treatment.
Whoa there! One step at a time...
Before your first treatment on each new body area, test your skin (in that
area) for a reaction to SMOOTHSKIN BARE.
The Patch Test area should be approximately 3cm x 2cm (equivalent to 2
flashes side by side).
1.
Follow the instructions in the ‘Getting Started’ section to begin as
usual.
2. Treat the area.
3.
Wait 24 hours.
4. If there’s no reaction after 24 hours, you’re good to go! The ‘patch
tested area’ should NOT be re-treated for at least 1 week.