manualshive.com logo in svg

Smooth Fitness EVO 3CD, Руководство пользователя, Страница: 3 / 44

Поделиться
Скачать
Smooth Fitness EVO 3CD Скачать руководство пользователя страница 3

power requirements

PO

WER REQUIREMENTS

conductor and a grounding plug.
Always plug the power cord into a
surge protector, and plug the surge
protector into an appropriate outlet
that is properly installed and
grounded in accordance with all local
codes and ordinances.

This product is for use on a nominal
120-volt circuit, and has a grounding
plug that looks like the plug illustrated
in the drawing below.

Power Requirements

:

IMPROPER CONNECTION OF
THE EQUIPMENT GROUNDING
CONNECTOR CAN RESULT IN A
RISK OF AN ELECTRIC SHOCK.
CHECK WITH A QUALIFIED
ELECTRICIAN OR SERVICE MAN
IF YOU ARE IN DOUBT AS TO
WHETHER THE PRODUCT IS
PROPERLY GROUNDED. DO NOT
MODIFY THE PLUG PROVIDED
WITH THE PRODUCT, IF IT WILL
NOT FIT THE OUTLET, HAVE A
PROPER OUTLET INSTALLED BY
A QUALIFIED ELECTRICIAN.

This treadmill can be seriously
damaged by sudden voltage
changes in your home’s electrical
power.  Voltage spikes, surges and
noise interference can result from
weather conditions or from other
appliances being turned on or off.
To reduce the possibility of treadmill
damage, always use a surge
protector (not included ) with your
treadmill.

Surge protectors can be purchased
at most hardware stores.  The
manufacturer recommends a single
outlet surge protector with a UL 1449
rating as a Transient Voltage Surge
Suppressor (TVSS) with a UL
suppressed voltage rating of 400V
or less and an electrical rating
120VAC,15 amps.

This treadmill must be grounded to
reduce the risk of electrical shock.
Grounding provides a path of least
resistance for electric current, should
the treadmill malfunction.  This
treadmill comes with an electrical
cord having an equipment-grounding

-3-

SURGE PROTECTOR
GROUNDING PLUG

SURGE PROTECTOR

GROUNDING PIN

GROUNDING OUTLET

TREADMILL POWER CORD

ADAPTOR

SCREW

GROUNDING OUTLET

SURGE PROTECTOR
GROUNDING PLUG

Содержание EVO 3CD













































Отзывы:

Нет отзывов