36
675i TREADMILL
COMPUTER OPERATION
P3 HRC(Heart Rate Control):
1. Press
【
Program Select
】
to select the
【
HRC
】
program and press enter.( TARGET Heart Rate)
2. Set time: Press the
Speed
ㄧ
/
十
to set the time then press
【
Enter
】
to confirm.
3. Set target heart rate: TARGET H.R. mode preset value=130 (MHR mode preset value depends on the age set)
press the
Speed
ㄧ
/
十
to set the target heart then press
【
Enter
】
to confirm.
4. Set begin speed: Speed window shows lowest begin speed, press
Speed
ㄧ
/
十
to set begin speed then press
【
Start
】
to begin workout.
5. Beginning the workout:
5.1. The program will compare the real time and preset target heart rate every 30 seconds to adjust incline until
the actual heart rate is reaches with in + or – 5 beats of the preset target heart rate.
(1). During the program, if the actual pulse rate
≦
target workout heart rate minus 5, the incline will be
increased one level every 30 seconds until the max. level.
(2). During the program, if the actual pulse rate
≧
target workout heart rate plus 5, the incline will be
decreased one level every 30 seconds until the min. level.
5.2. You can use any speed or incline key or device to change the speed or incline during your workout.
5.3. The program will end when the counter reaches 0, then enter cool down.
P4 Fitness test
1. Press
【
Program Select
】
to select the
【
Fitness test
】
program and press enter.
2. Set begin speed
：
Speed window shows lowest speed, press the speed
─ / ┼ to set begin speed then press
【
START
】
to begin workout.
3. Begining the workout
：
3.1. This program is testing your fitness condition, how far you can run in 12 minutes, you can use any speed key
to
change the speed during your workout, the incline function is not available.
3.2. The program will end when the counter reaches 0.
3.3. Test result
：【
VERY GOOD
】
,
【
GOOD
】
,
【
AVERAGE
】
,
【
BAD
】
,
【
VERY BAD
】
P5 CUSTOM:
1. Press
【
Program Select
】
to select the
【
CUSTOM
】
program and press enter.
2. Set each Segment
：
There 20 Segments you can set according to your desired levels of intensity, you can set the
speed, incline and time in each segment.
2.1. Set speed
：
Press the speed
─ / ┼ to set the speed of the segment.
2.2. Set incline
：
Press the incline
▲ / ▼ to set the incline of the segment.
2.3. Set time
：
After setting the speed and incline press
【
ENTER
】
to set time, press speed
─ / ┼ to set time then
press
【
ENTER
】
to confirm and move to the next segment.
3. Press
【
START
】
to begin workout after all segments are set, the custom program will now be saved for future
use.
4. Beginning the workout:
4.1. The speed and incline change automatically according to the values previously set. The program will move
from one segment to the next after the preset time for each segment expires. The program will skip any segments
that are set to 0 time.
4.2. The program will end when the last segment time reaches 0.
Содержание 6.75
Страница 12: ...12 675i TREADMILL PARTS DIAGRAM MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE ASSEMBLED ...
Страница 13: ...www smoothfitness com 13 PARTS DIAGRAM MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE ASSEMBLED ...
Страница 14: ...14 675i TREADMILL PARTS DIAGRAM A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY ...
