SMOOTH 6.25E MOTORIZED TREADMILL
www.smoothfitness.co.uk
25
COMPUTER OPERATION
FITNESS-TEST
Press to start the Fitness-Test function to test your physical condition during a workout. Follow the Fitness-Test operating
instructions for details.
.
SPEED UP / DOWN
a. Press to increase/decrease exercise speed by 0.1mph / km/h.
b. Hold the button to rapidly increase/decrease speed by 0.5mph / km/h per second. Release the button to stop the
function.
INCLINE UP / DOWN
a. Press up or down to change incline level.
b. Press to select programs and preset related function value.
IMPORTANT INFORMATION:
SAFETY KEY
The safety key must be inserted into the slot on the console in order to operate the treadmill. Always insert the safety key
and attach the clip to your clothing at your waist before beginning your workout. If you should encounter problems and
need to stop the motor quickly, simply pull on the cord to disengage the safety key from the console. To continue
operation first turn the power switch to OFF and set the speed controller to stop. Next turn the power switch to ON and
reinsert the safety key into the console.
ENGLISH / METRIC CONVERSION
The treadmill computer display can show METRIC and ENGLISH information. This should be preset for your area by the
factory. However, in case the treadmill needs to be converted between METRIC and ENGLISH readout, please follow the
procedure below:
Set the POWER SWITCH to ON. Press the START button on the computer and hold it. Insert the SAFETY KEY then
release the START button. The computer will sound one short beep. Press the START button to switch between
ENGLISH and METRIC and press STOP/ENTER button to confirm the setting. The computer will sound a long beep and
will return to the POWER ON mode with the new setting.
POWER ON
Set the POWER SWITCH, located on the base frame, to
ON and insert the SAFETY KEY. All LED windows light
up with a short beep sound. “U1” displays in the LAP
window, TIME/DISTANCE displays the user weight factory
setting value “150”lbs or “68”kg, SPEED/CALORIES
displays the user height factory setting value “63”inches or
“160”cm, and PULSE/INCLINE displays the user age
factory setting value “35”. If there is any user information
that has been input and saved, all LED windows will
display the information from the last input user information.
If no further button inputs are made within 3 minutes, the
computer will enter the SLEEP MODE. Press any button
to return to the POWER ON mode.
SLEEP / DISPLAY MODE
When the power is ON the computer will automatically enter SLEEP MODE if it is left idle for 3 minutes without receiving
any input. Press any button to return to POWER ON status when the computer is in the SLEEP MODE.
To cancel the SLEEP MODE feature using the DISPLAY MODE and always keep the console display on, pull out the
safety key, press and hold the SPEED UP and DOWN buttons, insert the safety key to power on the treadmill. After one
short beep sound the TIME LED window will show “ON” (SLEEP MODE feature on) or “OFF” (SLEEP MODE feature off).
Press the INCLINE UP and DOWN buttons to switch between “ON” and “OFF” then press STOP/ENTER to save the
setting and return to POWER ON mode.
