3
Instructions for Assembly
Ensure that you have received all the parts required (see check
list) and that they are undamaged. Should you have any cause
for complaint, please contact your dealer.
Before assembling the equipment, study the drawings carefully
and carry out the operations in the order shown by the dia-
grams. The correct sequence is given in capital letters.
The equipment must be assembled with due care by an adult
person. If in doubt call upon the help of a second person, if
possible technically talented.
Please note that there is
always
a danger of injury when wor-
king with tools or doing manual work. Therefore please be ca-
reful when assembling this machine.
Ensure that your working area is free of possible sources of
danger, for example don’t leave any tools lying around. Al-
ways dispose packaging material in such a way that it may not
cause any danger. There is always a
risk of suffocation
if child-
ren play with plastic bags!
The fastening material required for each assembly step is sho-
wn in the diagram inset. Use the fastening material exactly as
instructed. The required tools are supplied with the equipment.
Bolt all the parts together loosely at first, and check that they
have been assembled correctly. Tighten the locknuts by hand
until resistance is felt,
then use spanner to finally tighten nuts
completely against resistance (locking device).
Then check that
all screw connections have been tightened firmly.
Attention:
once locknuts have been unscrewed they no longer function
correctly (the locking device is destroyed), and must be repla-
ced.
For technical reasons, we reserve the right to carry out preli-
minary assembly work (e.g. addition of tubing plugs).
List of spare parts page 11-12
Example order:
Art. no. 07859-999 / spare-part no. 70128679
/ 2 pieces / S/N .................... Please keep original packaging
of this article, so that it may be used for transport at a later date,
if necessary.
Important:
spare part prices do not include fastening material; if
fastening material (bolts, nuts, washers etc.) is required, this
should be clearly stated on the order by adding the words
“with
fastening material“
.
Waste Disposal
SMOOTH products are recyclable. At the end of its
useful life please dispose of this article correctly and
safely (local refuse sites).
Always wear suitable shoes when using.
All
electric appliances emit electromagnetic radiation when in
operation. Please do not leave especially radiation-intensive
appliances (e.g. mobile telephones) directly next to the cockpit
or the electronic controlsystem as otherwise values displayed
might be distorted (e.g. pulse measurement).
When ordering spare parts, always state the full article number,
spare-partnumber, the quantity required and the S/N of the pro-
duct.
Example of label - Serial number
1
2
3
4
5
Trainingsgerat nach DIN
DIN EN 957 Teil 1/5
Klasse: HA
Fur therapeutische Zwecke geignet
Typ 7858-699
368a
Baujahr O-0301
Kontroll Nr. 218
max. Belastung 150 kg
Made in Germany
101
Serial
Number
