HEX390 Installation & Commissioning Instructions September 2016
6
Hex Unit
It’s best to install over the bathroom, garage or
similar location where occupancy is minimal and
also where the unit could be easily accessible for
servicing. Securely install the unit horizontally by
using the provided installation kit as illustrated
below. Ensure enough space is provided for the
installation of the condensation drain adaptor and
tubing (located inside the unit). Once duct and
fittings connected, unit needs to be level for drain
to work properly.
200mm x 3m
insulated
200mm Circular Eggcrate
200mm x 3m
insulated
200mm x 3m
silent
Supply
Exhaust
Extract
Fresh
200mm x 6m
silent
150mm x 3m
silent
150mm x 3m
silent
150mm x 3m
silent
200mm x 3m
silent
200mm x 3m
insulated
Drain
200mm x 6m
nude
6m
200mm x 6m
silent
200mm louvre sq grille
200mm louvre sq grille
150mm Cone Diffuser
200mm Swirl Diffuser
150mm Cone Diffuser
150mm Cone Diffuser
200mm Circular Eggcrate
General Layout
• Up to 6 times faster to install than traditional methods
• Keyless - no tool required for adjustment
• Ergonomic buttons allow rapid adjustment
• Discreet and aesthetic design
• Load rated at 45 kg with a 5:1 safety factor
• Supplied as a ready-to-use kit
The Gripple Express is a fast locking solution for quick and easy suspension of signage,
shopfitting display, HVAC, plumbing, cable containment and lighting.
ADVANTAGES
PRODUCT DIMENSIONS
END FIXING
INSTALLATION
RELEASE
Gripple Express No.2
Gripple Ltd
|
The Old West Gun Works
|
Savile Street East
|
Sheffield S4 7UQ
Tel
0800 018 4264
Fax
0114 275 1155
www.gripple.com
PI-47-ENG
D
W
L
Wire rope diameter
L (mm)
W (mm)
D (mm)
2 mm
28.4
21.4
11.6
* This product is silicone free
Each ready-to-use kit comes with an end fixing of
your choice. All types can be ordered to the length
you require (up to 10 metres or more).
For further detailed information on any of our end
fixings, please visit our website or contact us using
the information below.
1
2
G-XP2-go Express Gripple operation
Installation Instructions
Use supplied Gripple kit to
hang unit level
