49
With the Door open, turn the Switch ON (J) and the Temperature/ Dial to SMOKE. In approximately 2 minutes you will
notice whitish-gray smoke coming out of the Grill as the Pellets ignite. After assuring the Pellets have ignited, close
the Door and set the Temperature/Dial to any cooking setting desired.
e) If this didn't remedy the problem, contact Smokey Bandit Grills
Technical Support (Section Seven) for additional
troubleshooting help.
5.WITH THE SMOKEY BANDIT GRILL DIGITAL CONTROL, WHAT DIAL
SETTING IS RECOMMENDED FOR STARTING THE GRILL ?
COMPONENT LIST
The auto-start procedure is the same for all Grill Controls. With the Door open, turn the Switch ON (I) and
the Temperature/Dial to SMOKE. In approximately 2 minutes you will notice whitish-gray smoke coming out of
the Grill as the Pellets ignite. After assuring the Pellets have ignited, close the Door and set the
Temperature Dial to any cooking setting desired.
6.WHAT TEMPERATURE SETTINGS DO I USE WITH MY DIGITAL
THERMOSTATCONTROL WHEN THE COOKBOOK RECIPES C ALL FOR
SMOKE, MEDIUM AND HIGH?
This handy conversion chart will help you determine where to set the Thermostat when the recipes call
for "Smoke'; "Medium" or "High" settings with the 3-Speed Smoker Control. Remember: Grill temperature
20
Hopper Burner Handle
50
Platform
is affected by conditions such as outside temperature, precipitation and wind as well as altitude. Please
keep this in mind when determining how long it will take food to cook on your Grill.
7.HOW DO I PROTECT MY PAINT FINISH?
1.
Use a protective Cover on the Grill and touch-up paint to repair any scratches.
Smokey
bandit
to protect the Grill is highly recommended! Covers and touch-up paint are available from your
Dealer, or log
on to our Web Site - www.smokeybanditbbq.nl.
2. Every 90 days, use a high quality car wax on the outside surfaces of the Grill. ONLY APPLY WAX TO A
COLD GRILL.
Remark: 52*(Screw package) has 19 screws in total, including 18 necessary screw and 1 spare screw.
