11
7
Step 10:
Locate
Note
Tools Needed
Procedure
: Heat Indicator/Nameplate [6]
: The heat indicator/nameplate [6] is supplied with
two M5 nuts [6A].
: Pliers
:
Mount the heat indicator/nameplate [6] to the front of the
door panel [2] using the three corresponding holes.
From the inside of the door panel, secure the nameplate
with the two supplied nuts
and tighten firmly.
[6A]
: ten Grid Tracks [12], one Wood Box Rack [7],
three Cooking Grids [11].
: none
:
Install one grid track [12] in each of the bottom holes
located in the grid support for both the left and right sides
of the cabinet.
Slide the wood box rack [7] onto the bottom grid tracks
[12].
Install the remaining eight grid tracks [12] as desired
among the grid support holes (4 on each side). Be sure to
place a set of grid tracks at the bottom-most set of holes
for the water bowl.
Ensure the grid tracks are at the same level on both sides
of the cabinet.
Slide a cooking grid [11] into each of the top three grid
supports [12].
Step 11
Locate
Tools needed
Procedure
6
2
Assembly
Assembly
11
6A
12
12
12