✓
For vacuum leak in pickup tube
SPRAYER OUTPUT VOLUME REDUCED
✓
If pickup tube or discharge hose for restrictions
✓
Sprayer wand and wand tip for restrictions
✓
Material is too high in viscosity
✓
Material is too cold
EXCESSIVE VIBRATION ON SPRAYER
✓
For foreign debris on sprayer assembly or bucket
✓
For loose hardware on sprayer assembly
Page 12
Chemical Compatibility
Refer to the following website for a chemical compatibility
chart to ensure that the material you wish to spray is
compatible with the pump components (Viton®,
Santoprene® and Polypropolene).
www.shurflo.com/pdf/industry/CCChart.pdf
!
C A U T I O N
!
IT IS YOUR RESPONSIBILITY TO ENSURE THAT THE
MATERIAL YOU ARE SPRAYING IS COMPATIBLE WITH
THE PUMPS COMPONENTS.
Page 11
!
C A U T I O N
!
Due to the nature of this unit, it is imperative the unit
is properly cleaned and flushed using the