Page 5
Page 6
Connecting the Keyboard to the Computer
• Remove the USB receiver dongle from its storage located at the back of the keyboard. Plug
the dongle into an available USB connector on the notebook or desktop MCE computer.
Wait for the system to detect new hardware and run through auto-install process in the OS.
Connecting and Synchronizing the Keyboard to the PC
• The USB receiver and keyboard are pre-synchronized at the factory for your
convenience. The keyboard should be functioning now. Next, turn on the keyboard
power switch located at the back of the keyboard by placing the power switch to
“On” position.
• Make sure the keyboard is within 30 feet from the PC. This product is designed with
RF technology without line of sight. Nevertheless it’s recommended to keep the
receiver dongle away from metal walls/panels to achieve its full transmission strength.
• This keyboard is designed with the latest RF technology. Once the link is established
between the keyboard and the receiver dongle, they stay connected even when the
keyboard is turned off and out of range. If for any reason the connection is lost,
or there’s interference in the vicinity, you may reset the connection by doing
the following:
Remove the receiver dongle from the PC, wait 3 seconds and plug the receiver back
into the computer’s USB port. Press the “ID” button located at the back of the
keyboard for 3 seconds. The RF (radio frequency) will be reset to another channel.
If this doesn’t clear the interference, power off the computer and power on again to
reset the RF channel.
• Please note that there’s no “ID” button on the receiver dongle. This product is
designed with the latest RF connection technology and the receiver is set to
automatically scan and synchronize with the keyboard each time the computer is
powered on.
