MPE Requirements
Region Section
To satisfy FCC / IC RF exposure requirements, a separation distance of 20 cm or
more should be maintained between the antenna of this device and persons during
device operation.To ensure compliance, operations at closer than this distance is
not recommended.
Les antennes installées doivent être situées de facon à ce que la population ne
puisse y être exposée à une distance de moin de 20 cm. Installer les antennes de
facon à ce que le personnel ne puisse approcher à 20 cm ou moins de la position
centrale de l’ antenne.
La FCC des éltats-unis stipule que cet appareil doit être en tout temps éloigné d’au
moins 20 cm des personnes pendant son functionnement.
Limited by local law regulations, version for North America does not have region
selection option.
Under Industry Canada regulations, this radio transmitter may only operate using
an antenna of a type and maximum (or lesser) gain approved for the transmitter by
Industry Canada. To reduce potential radio interference to other users, the antenna
type and its gain should be so chosen that the equivalent isotropically radiated
power (e.i.r.p.) is not more than that necessary for successful communication.
Conformément à la réglementation d’Industrie Canada, le présent émetteur
radio peutfonctionner avec une antenne d’un type et d’un gain maximal (ou
inférieur) approuvé pour l’émetteur par Industrie Canada. Dans le but de réduire
les risques de brouillage radioélectrique à l’intention des autres utilisateurs, il faut
choisir le type d’antenne et son gain de sorte que la puissance isotrope rayonnée
équivalente (p.i.r.e.) ne dépasse pas l’intensité nécessaire à l’établissement d’une
communication satisfaisante.
Warranty
FCC Certification
This device complies with Part 15 of the FCC Rules / Industry Canada license-
exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de
l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d’en compromettre le fonctionnement.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•
Consult a dealer or experienced radio/TV technician for help.
Regulatory Compliance
Thank You
Thank you for your purchase of the GoSpeak! Pro Ulta Portable
PA System and for choosing SMK-Link Electronics to meet your
presentation needs. We look forward to serving you in the future.
To learn about new SMK-Link products as they become available,
and to ensure the best possible customer support, please register
your product online at www.smklink.com/register.
Support
SMK-Link Electronics Corporation
3601-B Calle Tecate
Camarillo, CA 93012
TEL: (888) 696-3500
FAX: (805) 987-6665
Email: [email protected]
www.smklink.com
©2014 SMK-Link Electronics Inc. SMK-Link, the SMK-Link logo and GoSpeak! are
trademarks or registered trademarks of SMK-Link Electronics, Inc. All other trademarks are
properties of their respective owners. Made in China.
SMK-Link Electronics Corporation (SMK-Link) warrants to the original end-user
purchaser of the Product (“you”) that the Product, excluding batteries, will be
free from defects in materials and workmanship under normal use and service
for one-year from date of purchase. If the product becomes defective in materials
or workmanship during the warranty period, SMK-Link will, at its option, either
repair or replace it. The replacement unit may be a more current or upgraded
model if the originally purchased model is not available.
Any Product repaired or replaced under the terms of the warranty is covered for
the remainder of the original warranty period or ninety (90) days from the date
of return shipment, whichever is longer. This warranty does not cover products
which have been subjected to misuse, accident, physical damage, improper
installation, abnormal operation or handling, neglect, inundation or fire or when
product regulator label has been removed, altered or rendered illegible; nor does it
cover accessory or consumable items.
SMK-Link shall not be liable for any indirect special, incidental, or consequential
damages. SMK-Link’s total liability for damages for any cause related to, or arising
out of, the use or inability to use the product shall not exceed the original price
paid for the product even if SMK-Link has been informed of such possibility.
If your product requires service under warranty, you must first contact SMK-Link
product support to receive an RMA number. Shipping of defective units back to
SMK-Link is at your expense. The contact information can be found on the SMK-
Link website: www.smklink.com.
This warranty does not affect your statutory rights and you may have other rights
which vary from state to state and country to country. This warranty is understood
to be the complete and exclusive agreement between the parties, superseding
all prior agreements, oral or written, and all other communications between the
parties relating to the matter of this warranty.
The above warranty does not apply to products sold in Australia. Products sold
in Australia by an authorized reseller will contain an Australia specific warranty
statement.
