44121045.doc Page 3 of 6
1.2
“ON” indicates power on time.
1.3
“OFF” indicates power off time
2.
To chose the program group and on/off status, press
▲
+
Button to increase the group number,
sequence as follows:
1ON
1OFF
…… 14ON
14OFF
d ON/OFF (for countdown)
real time display
3.
To reduce the program group number, press –Button, LCD displays in the following sequence:
d ON/OFF (for countdown)
14OFF
14ON
…… 1OFF
1ON
real time display
4.
After choosing the program group, then can set the week and time. Press SET Button until the
week display flashes, press
∧
+
Button each time, the LCD will display the following in
sequence:
4.1
MO TU WE TH FR SA SU
4.2
MO
TU
WE
TH
FR
SA
SU
4.3
MO WE FR
4.4
TU TH SA
4.5
SA SU
4.6
MO TU WE
4.7
TH FR SA
4.8
MO TU WE TH FR and
4.9
MO TU WE TH FR SA
5.
By pressing the
▼
–Button, the week display will be shown in the opposite direction as above
sequence.
6.
Press
▲
+
/
▼－
Button once will increase or reduce the week display slowly. To press and hold the
button, the display moves quickly. Release the button until your desired week pattern shown on
the display. Press SET Button to confirm, week display stops flashing.
7.
After set the day of the week, the hour display flashes, repeat procedures mentioned in
Part D2.
Time Setting
to set time.
8.
To set other program group’s on/off time, repeat procedures mentioned from #2 to #7.
Noted:
(a). To change a preset program, repeat procedures #2 to #7 as mentioned in
Part E
and input the
new data to replace the old setting
(b). After program setting, press CLOCK Button to return to clock display at once, or it will be
returned automatically after 15 seconds without pressing any other buttons.
F.
Countdown Setting
1.
When the LCD is in real time display, press
▼－
Button once to change to countdown setting
display, “d ON (or OFF)” will be shown on the lower left corner of the LCD
1.1
“d”:
indicates the program is in countdown mode
1.2
“ON”:
counting down the power on time
1.3
“OFF”:
counting down the power off time
2.
Press SET Button until the on/off display flashes, setting the countdown power on/off status is
