Step 2:
Connect the zippers on the Annex to the
zippers on the base of the tent. (Fig E,) Slide the left
zipper along the edge and stop a few inches after
you get around the corner, then connect the right
hand side zipper and zip it up 8”, then go back to
the left zipper and complete zipping it up.(Fig E)
The go back and complete zipping the right side
zipper.
Note: On the standard size tent:
The Ladder
goes on the outside of the Annex and annex will
secure to the tent via Velcro strip near the ladder
(Fig F, G).
XL tent
uses one long zipper and ladder
will be inside the annex.
WWW.SMITTYBILT.COM
2
Annex Install Instructions
Step 1:
Remove Annex from bag. Carefully slide the one end with the plastic tube into the rail on the bottom of
your tent. This is easier to do when tent is still folded closed. (Fig A, B) The back will now hang down as shown in
Fig C, D.
NOTE:
Gen 2 annex will zip to the zipper that was used to attach the tent cover to the tent. Fig A&B will
not apply to Gen 2 annex, you will have a zipper in that location.
(Fig A)
(Fig B)
(Fig C)
(Fig D)
(Fig E)
