STEP 1:
Locate and identify the location for the mounting bracket. (Fig A)
STEP 2:
Attach the rear part of the bracket to the winch by removing the rear tie rod
bolt. Place the bracket over the hole and re-install tie rod bolt. Do not tighten
completely. (Fig B)
STEP 3:
Loosen (Back-Out) the two screws on the side of the solenoid box and place
bracket over the two bolts and slide the solenoid box back and tighten the
bolts securely. (Fig C, D)
(Fig A) (Fig B)
(Fig C) (Fig D)
Over Motor Mounting Instructions
