STEP 1:
Insert the small metal brackets on the bottom of the solenoid bracket. (Fig A)
STEP 2:
Place long mounting brackets on top (hook facing forward) and secure with
included bolts. (Fig B, C)
STEP 3:
Place solenoid on top of tie-rods with hooks facing forward in desired location.
Secure by tightening the screws in the rear. (Fig D,E) Installation is now
complete. Use the wiring diagram in instruction manual for further assembly.
(Fig A) (Fig B) (Fig C)
(Fig D) (Fig E)
97281/972810
SOLENOID MOUNTING
SUPPLEMENT
Tie-Rod (over cable) Mounting Instructions
