background image

Issue 001 - January 2018  |  SmithsEP.co.uk  |  07

Thank you for purchasing a Smith’s product. It has 
been designed and manufactured to the highest 
quality standards to ensure it gives you efficient 
and trouble-free service for many years. To back 
up our commitment, included with your product  
is the following warranty:

Heat Emitter 5 years from date of purchase

This gives you the peace of mind that in the 
unlikely event of product failure, we will repair 
or replace the product completely free of charge 
providing the product has been installed, used  
and maintained in accordance with the 
instructions. Your statutory rights are not  
affected by this warranty.

It is important to register as soon as possible 
online at: smithsep.co.uk/product-registration/.  
This will ensure you will receive prompt and 
efficient service if your product requires attention 
within the warranty period. If you do not register 
your product, you will be required to produce 
proof of purchase prior to receiving service.

For more details please visit our website: 
SmithsEP.co.uk

Registering your product

Disposal

As part of the policy of continuous product 
improvement, Smith’s Environmental Products LTD 
reserves the right to alter specification without 
prior notice.

If you are purchasing replacement equipment your 
retailer may offer a ‘take back’ scheme, or will 
be able to give details of the nearest approved 
authorised treatment facility. Proper recycling and 
waste disposal will help conserve resources whilst  
preventing detrimental effects on our health  
and the environment.

 

Approved CQS ISO 

9001:2015

After sales and spares

If you experience any problems with the use of 
your product, please contact our after-sales office 
+44 (0) 1245 324560. 

For product information, customer services or 
sales support call us on +44 (0) 1245 324900

For the Republic of Ireland, contact MT Agencies 
on 01 864 3363

Sales: [email protected] 
General information: [email protected]

Smith’s Environmental Products Ltd
Blackall Industrial Estate, South Woodham Ferrers, 
Chelmsford, Essex CM3 5UW

SmithsEP.co.uk

@SmithsEP_UK

#ThinkSmiths

Содержание Sargasso A









Отзывы: