J
2009-07
WW1924-ADD7 REV 0
Setting Averaging
While
1.
AVG is being displayed, use the up and down keys (
n
o
) to select the desired SpO
2
averaging (1-4).
Press the
2.
Menu
key (
) to advance to the next menu.
To exit menus, press the
3.
Exit
key (
) or wait 20 seconds and menu will be exited automatically.
Setting Sensitivity
Advance from previous menu or see
1.
Entering Setup Menu
. HS (for High Sensitivity) will be displayed.
Using the up and down keys (
2.
n
o
), turn the High Sensitivity setting on or off.
Display Brightness
Advance from previous menu or see
1.
Entering Setup Menu
. The display will show db.
Using the up and down keys (
2.
n
o
), select the desired brightness, ranging from 1-10. The default setting is 10
(brightest).
Setting the Date
Advance from previous menu or see
1.
Entering Setup Menu
. To skip initial menus, if setting only date, press
Menu
key
(
) three (3) times until dt 1 (Date Setting 1) is displayed.
Use the up and down keys (
2.
n
o
) to select the year. Range is 00 (2000) to 99 (2099).
Press the
3.
Menu
key (
) to advance to the Month Menu. The display will show dt 2 (Date Setting 2).
Use the up and down keys (
4.
n
o
) to select the month. Range is 01 (January) to 12 (December).
Press the
5.
Menu
key (
) to advance to the Day Menu. The display will show dt 3 (Date Setting 3).
Use the up and down keys (
6.
n
o
) to select the day. Range is from 01 to 31.
Setting the time
Advance from previous menu. (To skip initial menus, if setting only date, press
1.
Menu
key (
) six (6) times).
The display will show
2.
t 1. Use the up and down keys (
n
o
) to select the hour. Range is 00 (Midnight)
to 23 (11PM).
Press the
3.
Menu
key (
) to advance to Minute Menu. The display will show t 2. Range is 0-59.
Press
4.
Exit
key (
) to exit Setup Menus.
Restoring Alarm Default Settings
Enter Setup Menu by pressing and holding the
1.
Exit
key (
) and then pressing the
Menu
key (
).
Press the
2.
Menu
key (
) eight (8) times. The display will show Ad (for Alarm Defaults).
Use the up and down keys (
3.
n
o
) to select Yes or no. “Yes” will restore the default alarm limits.
Page 2 of 4
Quick Reference Guide
WW1030
