Smiths Medical BCI 3304, Руководство по обслуживанию

Страница: 19 / 36

Chapter 1: Introduction
3304 Service Manual 1-7
WARnIng! Do not place the monitor in the patient’s bed or crib.
Do not place the monitor on the floor.
WARnIng! Failure to place the monitor away from the patient
may allow the patient to turn off, reset, or damage the
monitor, possibly resulting in the patient not being
monitored. Make sure the patient cannot reach the
monitor from their bed or crib.
WARnIng! Failure to carefully route the cable from the sensor
to the monitor may allow the patient to become
entangled in the cable, possibly resulting in patient
strangulation. Route the cable in a way that will
prevent the patient from becoming entangled in the
cable. If necessary, use tape to secure the cable.
WARnIng! If there is a risk of the AC power supply becoming
disconnected from the monitor during use, secure
the cord to the monitor several inches from the
connection.
WARnIng! Under certain clinical conditions, pulse oximeters may
display dashes if unable to display SpO
2
and/or pulse
rate values. Under these conditions, pulse oximeters
may also display erroneous values. These conditions
include, but are not limited to: patient motion, low
perfusion, cardiac arrhythmias, hi or low pulse rates or
a combination of the above conditions. Failure of the
clinician to recognize the effects of these conditions on
pulse oximeter readings may result in patient injury.
WARnIng! verify that all LeDs (light emitting diodes) on the
display light up upon startup of the device.