manualshive.com logo in svg

Smithco 20-500-C, Запчасти и обслуживание

Поделиться
Скачать
Smithco 20-500-C Скачать руководство пользователя страница 105

 103

Accessories

HOSE REEL ADJUSTMENTS

OPERATIONAL CHECK:

  1.  Pull hose off drum at least one full revolution. A clicking noise should be heard from locking mechanism.

  2.  Let the hose retract.

  3.  Pull the hose off until the first click is heard. Drum should lock when the hose tension is removed.

  4.  Continue pulling the hose, no more than one revolution, until no clicking is heard. Hose should rewind when tension 

is removed.

HOSE REPLACEMENT PROCEDURE: 

  1.  Facing swivel, turn the hose drum clockwise until all of the hose is removed from the drum and the drum is held by 

locking mechanism. Make sure spring is locked.

  2.  Remove hose clamps and disconnect hose from swivel. Remove old hose.
  3.  Insert new hose through roller guide, connect to swivel and reinstall hose clamps. Use spring guard over hose to 

protect the hose from being cut by the drum.

  4.  Remove check ball from old hose and install on replacement hose.
  5.  Carefully, keeping the tension on the hose, pull the hose to release the locking mechanism. Let the hose wind on 

the drum.

 

Содержание 20-500-C



































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды