2
Smith Slider 130
Produced in The Netherlands.
2 hours
not supplied
not supplied
not supplied
not supplied
PZ2
not supplied
3 Hex key
supplied
supplied
Do’s
Follow each assembly step in order to prevent incorrect
assembly.
Assemble on a clean soft surface to avoid damage.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled as illustrated
before use.
Check all screws or bolts are tightened and inspect regularly.
When you are ready to start, make sure that you have the
right tools, plenty of space and a clean, dry area for assembly.
Due to the size of this product we recommend that it is
assembled in the room intended for use.
During assembly children should be kept away from the
product due to possible risk of injury.
To clean wipe with a sponge and warm soapy water.
Do not use solvent based cleaners or detergents as they
can bleach or damage the product.
Warnings
Important:
Please retain these instructions
for future reference.
Assembly should be carried out by a compotent adult only.
Unwrap all packaging materials and place the components
on top of the carton box or on a clean floor to prevent it
from scratching.
This product should only be used on firm, level ground.
Keep small parts out of reach of children.
We recommend the use of the wall strap provided for safety
reasons. N.B. Wall fixings are not included – please source
suitable fixings for your wall type. If in doubt please consult
a qualified tradesperson.
Warning:
Always ensure the area to be drilled is free from
hidden electrical wires, water and gas pipes.
If you bought our item with glossy fronts, please
remove the protective foil before assembling.
Before you start
Dont’s
Do not use power tools to construct this product.
Do not sit or stand on the product.
Do not tighten screws until fully assembled.
Do not overtighten screws or bolts.
Do not use this product if parts are missing, damaged or worn.
Never use scourers, abrasives or chemical cleaners.
Number of people required to assemble
One person to assemble the product and two persons to lift
the product into position.
Time to assemble
Tradesman’s tips
“Hi, look out for me throughout this manual. Wherever you
see my picture I will have a handy tip to help you with the
assembly of your product”.
My first tip is: “Before you start get a cup of tea, sit down and
read through these instructions carefully”.
And for good measure my second tip is that you will need
the following tools to assemble this product, so gather them
to hand before you start.
Tools required
