Smith HSE-VAS-015, Руководство пользователя

Страница: 18 / 24

15
The water heater may not operate as desired if used incorrectly or there is a minor cause,
even though the product has no fault. In these cases, check the following issues to solve
simple problems without the help from the Customer care centre. If the problem does not
solve after checking the following issues, call Customer care centre.
Troubleshooting
Problems Possible Cause(s) Solution
Power indicator and Heating No power supply to the Heater. Turn ON electrical switch.
indicator does not glow.
No hot water.
Thermal Cut-out switch open. Call Customer care centre.
No power supply to the Heater. Check the power socket.
Control circuit or internal Call Customer care centre.
wiring error.
Water temperature is too high. Thermostat set is too high. Call Customer care centre.
Thermal Cut-out trips. Call Customer care centre.
Water heats slowly. Heating Element is not Call Customer care centre.
functioning.
Thermostat does not shut OFF. Thermostat is not functioning. Call Customer care centre.
Improper calibration. Call Customer care centre.
Piping connection leaks. Connection not sealed. Re-connect piping, using
Teflon tape. (Refer
Fig. 14)
Water leakage from product. Leakage in tank or other parts. Switch off power immediately
and Call Customer care centre.
Note: Call Customer care centre on 1800-103-2468
Circuit Diagram
Figure 21
Red
Thermal cutout Thermostat
Brown Red
Blue White
Blue
Green light Red light Element
White
Black
Black
Green/Yellow