SMITH SYSTEM Planner Studio Bench, Руководство по сборке

Страница: 4 / 9

Assembly Instructions
Document #: 179670 REVISED: 08/2020
1. Lay top down on a clean smooth surface that will not harm the top finish. Underside
of top should be exposed.
2. For the 24” deep bench, l ay both tops down on a clean smooth surface that will not
harm the top finish. Underside of tops should be exposed. Arrange tops as shown with
pre-
drilled holes closest to the edge facing inwards. Leave about 1/2” gap between the
tops.
½
”