SMITH SYSTEM LS 541N, Инструкция по сборке и руководство пользователя

Страница: 13 / 15

CABLE PULLEY ASSEMBLY /ORIENTATION
Assembly Hardware Required:
#35 Button Head Allen Screw Qty. 2 #41 Flat Washer Qty.4
#43 Nylon Nut Qty. 2
Assembly Description:
A) Thread the bolt-end of the
Lat Cable Assembly (#56) into the Swiveling Pulley Handles (#15).
Route the Cable through the series of upper pulleys and down to the Pulley on the Pulley Bracket
(#27) and up to the two Pulleys and down termination into the Selector /Top Plate Assembly
(#28), Do not fully tighten the locking nut or make cable adjustments until all the assembles have
been properly routed.
B)
Route the Lower Cable Assembly (#55) from the Swiveling Pulley Handles (#15) through the
bottom Pulley and Base Tube and the other Pulley and up to the pulley on the Pulley Bracket (#27)
and down to the Base Tube tight with 1
–
Button Head Allen Screw (#35), 2
–
Flat Washer (#41)
and 1
–
Nylon Nut (#43).
C)
Repeat the assembly A) & B) on the other side.
Page 12
54 Handle Strap 2pcs
55 Lower Cable 2pcs
56 Lat Cable 2pcs
57 Selector Pin 2pcs
Congratulations!
You have completed the assembly of this product and you are ready to atart exercising toward a healthier lifestyles!
52
35
41
43