For Assistance in assembling product, missing or damaged parts,
or to place an order, please contact customer service at 800-328-1061
You may also place your order online at
www.smithsystem.com
Form# 179721
04/2013
Step 3:
Remove the screw holding the bumper on. Gently slide the rear of the keyboard mechanism into
the track. (The rear is assembled with (4) white plastic slides.) When sliding the mechanism into the
track, be careful not to disengage the four nylon plastic slides. Reattach the Bumper.
NOTE: If the plastic slides
become disengaged, it is
essential that they be snapped
back into place. To do so,
simply place the mechanism
upside down on a hard
surface with the four plastic
slides being position flat on
the floor. Apply equal
downward pressure directly to
the slide until you hear the
slide snap together.
