10
Note: If you choose DAB or FM as the sound source, you are prompted to select the station you Last Listened
to or one of your preset radio stations. Use the ‘Tune -’ and ‘Tune +’ buttons to scroll through the available
options. Press the ‘Select’ button.
7. Use the ‘Tune -’ and ‘Tune +’ buttons to scroll to the frequency for the alarm. You can choose from Daily,
Once, Weekends or Weekdays. Press the ‘Select’ button.
Note: If you choose Once, you will be prompted to set the date for the alarm.
8. Use the ‘Tune -’ and ‘Tune +’ buttons to set the volume for the alarm. Press the ‘Select’ button.
Note: Remember to set the alarm radio volume to one that will wake you. The alarm volume will increase
progressively until it reaches the alarm volume you have set.
9. Alarm 1 Wizard’ is displayed again, together with ‘Alarm Off (or On)’. Use the ‘Tune -’ or ‘Tune +’ button to
display ‘Alarm On’ or ‘Off’. Press the ‘Select’ button. ‘Alarm Saved’ is displayed.
10. In Standby mode a bell symbol in the top right of the display will confirm when an alarm has been set.
Note: If the time is not set or has failed to update from the radio signal, ‘Time is not set’ will be displayed when
you try to set the alarm. The radio will then prompt you to set the time. An alarm can only be set after the time
has been set.
Stop the alarm
When the alarm sounds press the button. Alternatively, you can press the ‘Alarm Snooze’ button to ‘Snooze’
(see Snooze function below).
Snooze
When the alarm sounds press the ‘Alarm Snooze’ button to Snooze. The Snooze time countdown will be
displayed and the alarm will sound again in approximately 5 minutes.
Turn off the alarm
In Standby mode:
P
ress the ‘Alarm’ button repeatedly to turn Alarm 1 and Alarm 2 ‘On’ or ‘Off’. Press the ‘Select’ button. ‘Alarm
Saved’ is displayed.
Alternatively, follow the steps for ‘Setting an Alarm’ and select ‘Off’ in step 9.
System Settings
Your radio must be switched on (not in Standby mode) when you change the system settings.
Manual set the date and time
1. Press and hold the ‘Info/Menu’ button.
2. Use the ‘Tune -’ and ‘Tune +’ buttons to scroll to <System>. Press the ‘Select’ button.
3. <Time> is displayed. Press the ‘Select’ button.
4. <Set Time/Date> is displayed. Press the ‘Select’ button again.
5. ‘Set Time’ is displayed and the hour digits will flash. Use the ‘Tune -’ and ‘Tune +’ buttons to display the
correct hour in 24 hour clock. Press the ‘Select’ button.
6. The minutes will flash. Use the ‘Tune -’ and ‘Tune +’ buttons to display the correct minutes. Press the ‘Select’
button.
7. ‘Set date’ is displayed and the ‘Day’ will flash. Use the ‘Tune -’ and ‘Tune +’ buttons to display the day. Press
the ‘Select’ button.
8. The ‘Month’ will flash. Use the ‘Tune -’ and ‘Tune +’ buttons to display the month. Press the ‘Select’ button.
