6
7
smithandnoble.com
800.248.8888
SETTINGS MOTOR
CHANNEL
DISPLAY
UP
STOP/
FAVORITES
DOWN
CHANNEL UP
CHANNEL DOWN
REMOTE FRONT
CHANNEL
DISPLAY
OPEN
STOP/
FAVORITES
CLOSE
CHANNEL UP
CHANNEL DOWN
REMOTE FRONT
UNPAIR THE REMOTE
CHANNEL
DISPLAY
OPEN
STOP/
FAVORITES
CLOSE
CHANNEL UP
CHANNEL DOWN
REMOTE FRONT
Adding a remote
Start with a remote that is already paired to
the rod and select the channel programmed to
that rod.
Press P2 on the paired remote once, the motor
will beep once.
Press P2 on the paired remote once again, the
motor will beep once.
Press P2 on the new remote once, the motor
will beep 3 times. The new remote is now
paired to the rod.
Removing a remote
Remote (a) and remote (b) are both paired to
the rod and you want to remove remote (b).
Press P2 on the remote (a) once, the motor will
beep once.
Press P2 on the remote (a) once again, the
motor will beep once.
Press P2 on the remote (b) once, the motor will
beep 3 times. Remote (b) is no longer paired
with the rod.
ADD OR REMOVE REMOTE OR CHANNEL
CR2450
LITHIUM BATTERY
3V
P2
M
P2
REMOTE BACK
P2 BUTTON
DISABLING UNUSED CHANNELS
1. Press SETTING button on the motor for
2 seconds. The motor will sound a long beep.
2. Press the STOP button for 2 seconds. The
motor will sound 3 beeps. The motor has
been unpaired successfully.
NOTE:
If the STOP button is not pressed within
10 seconds, the motor will exit the unparing
mode automatically.
The 15 channel remote has the option of
turning off unused channels, making channel
selection easier.
Press and hold both Channel UP and Channel
DOWN buttons until the LED screen displays
the number 15.
Scroll through the channels to select the
required number of channels (between 1-15).
Press the STOP button once to confirm
selection. The remote will now only display the
number of channels selected.
Follow the same process if you need to re-add
channels.
