7
8
Installing the Shutters
Assemble the Frame (con't)
Slide the corner key that is in
the top and bottom frames into
the end of each side frame.
Using a rubber mallet hammer,
give a firm tap to the frame to
ensure the corner keys are fully
engaged.
Make sure the frame has been
properly assembled and is right
side up. The top of the frame is
indicated by a greater amount of
distance from the top of the top
hinge to the edge of the frame.
Fasten the frame. Insert a screw
in both the left and right top
side frame holes. Secure the
left screw first. Make sure the
frame is level and then secure
the screw on the right.
Now you can hang the panels.
Set the panel(s) in the frame and
insert the hinge pins of the top
and bottom hinges only.
Next you will square or level the
panels to the opening.
Move the bottom frame left or
right until the panels are level.
If this does not work, move the
left frame up or down until the
panels are level. Continue this
with the right frame until you get
the panels level.
Assemble the Frame
Installing the Shutters
Squareness Adjustments
Bottom
Top
