5
6
smithandnoble.com
800.248.8888
Inside Mount
Mount the brackets to the top of
the window frame . Make sure the
brackets are aligned .
Outside Mount
First, hold the shade above the
window so that it’s perfectly centered
over the window opening at the
desired height . Mark the position of
the bracket on the wall .
Mount the brackets to the wall . Make
sure the mounting brackets are level .
Step 2 — Mounting Brackets
Optional Extension Brackets are used
to project the back of the shade up to
2
1
⁄
2
" from the mounting surface . Attach
the Standard Mounting Bracket to the
Extension Bracket with the nut and
bolt provided .
Extension Brackets
(optional)
2"min. surface
required
Extension
Bracket
Bracket
Shades without Headrail
Once the brackets are secured and
level, the fabric roll can be inserted.
Make sure your hands are clean to
avoid soiling the shade .
Insert the foot of the motor-side
bracket into the slotted center hole of
the motor end of the shade . The wire
should be positioned so that it goes
up on an inside mount or back on an
outside mount . This will provide easy
access to the setting key .
Set the post of the idler end into the V of
the support bracket . Rotate the T-hook
on the support bracket to engage over
the nub to secure the fabric roll .
Step 3 — Hanging the Shade
Support
Bracket
Idler Post
Fig.15
V-Slot
Nub
Idler
Side
Bracket
T-Hook
Motor
Side
Bracket
Foot
