Smith & Noble Metro Chic Hardware, Руководство по установке

Страница: 7 / 9

11
12
smithandnoble.com 800.248.8888
STEP 9 - ATTACHING DRAPERY TO ROD
Insert drapery pin hooks into carriers
and master carriers.
Split Drapery
For Split drapery, start pining from
the center and go towards the ends.
Draw one side
For drapery opening from one side
only, start pining from the opening
side towards the end.
STEP 8 - ATTACHING BRACKET TO CEILING
MASTER
CARRIER
DRAPERY
PINS CARRIERS
Hold the rod up and attach the bracket to
the ceiling, aligning the holes of the brack-
et with the marks you made on ceiling on
a previous step. Be sure and attach the
bracket to the ceiling with the appropriate
mounting hardware.
(It is always recommended to try and
attach to the ceiling joists found inside
ceiling. Where this is not possible please
use an anchor suitable to carry the weight
of your hardware selection as well as your
draperies and any accessories.)
Tighten the hex screw on the back of the
ceiling bracket to make sure the rod is
attached strongly to the bracket.
HEX
SCREW
CEILING
BRACKET
SPLICE
CONNECTOR
BACK VIEW OF ROD
BACK VIEW OF ROD