3
4
smithandnoble.com
800.248.8888
STEP 1 - GETTING STARTED
OVERVIEW
Before you begin, check the accompanying diagram to make sure you have all the parts you
need. You’ll need to make sure the surface you intend to install your hardware is sturdy enough
to accommodate the brackets. If you’re screwing directly into a surface this means locating
wood studs that are strong enough to securely bond with the included screws. Otherwise,
you’ll need to use a secure fastener (as illustrated) but please note this piece is not included.
Tools & Parts
WALLBOARD OR PLASTER:
Hollow wall applications: Use a secure fastener designed
specifically for this purpose.
METAL:
Prepare by pre-drilling holes and then using the included screws.
CONCRETE, STONE, BRICK OR TILE:
Use a masonry drill and surface-specific plugs, anchors, or screws. When selecting a fastener
be sure it’s designed to support the weight of the product being installed (if you’re not sure,
either give us a call or ask a professional at your local hardware store). Once obtained, follow
the fastener manufacturer’s instructions regarding proper installation.
TOOLS YOU WILL NEED TO INSTALL YOUR HARDWARE:
Pencil, screwdriver, ¼" nut driver, level, and a drill with a
7
⁄
64
" drill bit.
Note: It’s important to monitor the amount of pressure you apply when using a drill. If the
screws are too tight this may cause the screw itself to break off in the wall or window frame.
MOLLY
BOLT
SELF DRILLING
ANCHOR
TOGGLE
BOLT
Euro Track Basics Heavy Duty Wall Mount Double Rod Set
SCREWS
MOUNTING CLIPS
END & CENTER BRACKET
PENCIL
(NOT INCLUDED)
BACK ONLY
ROD
FRONT OR
BACK ROD
CARRIERS
CENTER SPLICER BRACKET
SCREWDRIVER
(NOT INCLUDED)
POWER DRILL
(NOT INCLUDED)
LEVEL
(NOT INCLUDED)
ROD QTY
BRACKET QTY
ROD WIDTH
2
2
12"— 60"
2
3
601⁄
8
"—96"
4
4
961⁄
8
"—106"
4
5
1061⁄
8
"—156"
4
7
1561⁄
8
"—204"
4
7
2041⁄
8
"—216"
6
9
2161⁄
8
"—252"
6
11
2521⁄
8
"—288"
6
13
2881⁄
8
"—312"
8
13
3121⁄
8
"—384"
FINIAL
ROD
MOUNTING
BRACKET
MASTER
CARRIER
CARRIERS
