10
Temperature Range Adjustment
Your beverage cooler arrived to you with a factory preset temperature range of 41-72°.
While some might think that 41° is a perfectly fine temperature to drink beverages,
others might think this temperature is not far off from drinking a cup of piping hot
tea. If you want to keep your beverages as icy cold as possible, without freezing, we
have provided the following instructions to adjust your wine coolers temperature settings
so that the lowest temperature is 36°.
Step 1. Your beverage coolers control panel should be in a locked state before you proceed.
If you don’t know what we are talking about, read the previous page. If you don’t want
to read the previous page then just go 10-15 seconds without touching your beverage
coolers control panel. You will hear a beep and it will lock itself.
Step 2. Press and hold the
−
(Temp Down Button) for 3-5 seconds. You will hear a
beep and the letter E will appear in the temperature display window.
Step 3. Press the
−
button repeatedly, until you see the letter F appear. STOP
pressing buttons at this point because you’re done. After 10
-15 seconds, the beverage
cooler will lock itself and you can raise or lower the temperature by following the
steps on the previous page under Quick Start Guide.
Temperature
Code
Temperature
Range
E
41-72°
F
36-68°
H
50-66°
L
54-72°
G
41-64°
Your beverage cooler is a very flexible appliance and can be used to store more than
just beverages. You can use this appliance to store wine, beverages, cheeses, meats,
cigars and pretty much anything else that needs to be stored at climate controlled
temperatures. If you would like to change the temperature range so that you can use
this appliance for other applications, use the temperature range key listed above and
find the temperature range you want to use. Repeat these steps
.