Smitec CPC 0401, Инструкция по установке, эксплуатации и обслуживанию

Страница: 18 / 35

FLXMOD CPC 04XX series Installation, use and maintenance manual - EN
Ver. 1.02 18
6.1.2 Signalling LEDs
6.2 Top view
Depending on the model, the outputs on the DVI-I connector are different:
6.2.1 Connection references
*: in devices with order code KZ010609, in order to improve electromagnetic immunity, there is a delayed acti-
vation device for the touch-screen sensor integrated in the HMI B1 accessory (see chapter 5.6). The activation
delay from turning on/restarting the device is factory set to 45s and can only be changed by updating the device
firmware.
Name Function
PWR
It indicates that the 24VDC main power supply is present and the protective fuse is not
blown
PW1 It indicates that the internal power supply 1 (5 VDC) is present
PW2 It indicates that the internal power supply 2 (3.3 VDC) is present
CFAST LED It indicates the system's access to the CFast memory
STS Indicates the operating status of the system by means of programmable LEDs
Name Function
HMI Port for HMI B1 panel (mod.CPC 0401) *
DVI-D Port for external monitor (mod.CPC 0402)
HMI (mod.CPC 0401) DVI-D (mod.CPC 0402)