COSMOS DRIVER SERIES 3000 - USE AND MAINTENANCE MANUAL
5.3.7 Encoder input/output 2 (E2)
Depending on the models, the connector E2 can feature input signals for a second type of encoder or a repetition of the
signals connected to connector E1 (see chapter
).
Connector type: D-SUB HD15 F (not supplied)
Order code: --------
Features
Allowed conductor section
5.3.7.1
Encoder input
This input is used in mutual exclusion with encoder 1 input (E1); it is useful for the driver or for the process controlling
device in order to know the real position of the motor or of a mechanical component and take corrective actions, if
necessary. This input is mainly designed for Hyperface encoders.
Connector E2
Label
Signal
1
+8Vdc
2
Sine +
3
Sine - (Rif.)
4
5
Cosine - (Rif.)
6
7
8
9
10
11
GND
12
Data +
13
Data -
14
NTC
15
NTC
SHELL
Shield
Ver. 1.07
Pag. 42
