COSMOS DRIVER SERIES 3000 - USE AND MAINTENANCE MANUAL
4.2.2 Model code
The specific features of each driver COSMOS 3000 are defined by an alpha-numeric code printed on the device label,
near the MODEL code. Here is the coding table.
Ver. 1.07
Pag. 16
MODEL * * * * * . * * * * * . * * * * *
Reserved
Reserved
Reserved
Reserved
Auxiliary power
1
= 24Vdc
Main power
1
= 230÷480Vac 3PH
Maximum output current – Asyncronous motor power
1
= 15Apk – 2.2kW
2
= 25Apk – 5.5kW
3
= 50Apk – 7.5kW
Safe Torque Off (STO) system
0
= Absent
1
= Present
Dynamic brake
0
= Absent
1
= Present
Brake resistor
0
= Absent
1
= 2,5kJ
2
= 5,0kJ
3
= 4,0kJ
4
= 0,8kJ
Encoder
0
= Absent
1
= Incremental 5V diff. phases and HALL TTL + Hiperface
2
= Hiperface
3
= Incremental 5V diff. phases and HALL TTL
4
= Incremental HTL 24V
5
= Incremental 5V diff. phases ande HALL TTL + Out
6
= Incremental 5V diff. phases andHALL TTL/diff.
Forced ventilation
0
= Absent
1
= 1x31,5CFM
2
= 2x31,5CFM
3
= 2x10.8CFM
Field bus physical layer
0
= Absent
1
= EIA-RS485
2
= Ethernet
3
= POF – Sercos II
VISIO 3000 support
*
= Absent per Type 3150
*
= Present per Type 3250/3500
0
= Absent
1
= Present
I/O Configuration
*
= Absent
0
= Absent
1
= Type 1
2
= Type 2
