smirthwaite STRATO 10041, Инструкция по эксплуатации

Страница: 30 / 40

Strato
29
6.4 PELVIC STRAP
6.4.1 PELVIC STRAP
ADJUSTMENT
•
Release either clip (F)
•
Seat user in the chair
•
Ensure user is seated with lower
back against the lumbar prompt
•
Re-connect clip (F)
•
Pull simultaneously on straps (D)
•
Maintain the position of the user
in the chair
•
Place ends of straps inside sleeve
(E)
•
Do not over tighten.
6.4.2 PELVIC STRAP ATTACHMENT
•
Remove the lumbar prompt (see 6.2)
•
Thread the lower ends of the lumbar prompt tubes (D) through the looped ends (B)
of the pelvic strap (A)
•
Slide up locating rings (C) below looped ends (B)
•
Insert ends of lumbar prompt tubes (D) into receivers (E)
•
Tighten handwheels (F)
•
Anchor the other end of the pelvic strap to the underside of the seat using
handwheels (G)