4
5.0 SETTING UP AND ADJUSTING YOUR THERAPY BOLSTER
STOP!
If in any doubt, ALWAYS seek ADVICE
Always turn handwheels, levers and screws clockwise to tighten or
anti-clockwise to loosen. The bolster must be fully adjusted by a
therapist or trained representative before use.
5.1 BOLSTER HEIGHT
The bolster adjusts up and down within the safety slots provided at each end.
Loosen handwheels at one end (A).
Select the most appropriate slot to the
desired height
Re-tighten handwheels (A)
Repeat process for other end.
5.2 BOLSTER ANGLE
To slope the bolster (change angle), set
one end higher than the other using the
handwheels as per section 5.1.
5.3 BACK PAD HEIGHT ADJUSTMENT (LG013)
To adjust the pad height on the high back
variant of the therapy bolster, loosen the
handwheels at the rear of the high back
(B) and adjust/set appropriately.
A
B
