SMI Group MFG 99945, Руководство по установке

Страница: 13 / 16

Insert the spade located on the red wire of the
CoachLink™ Transmitter cable into the red flipover
spade connector.
Using Pliers clip the red flipover spade connector
over the cold side of the brake light switch. If your
vehicle has an inactive brake light switch connect
the red flipover spade connector to the cold side
of the aftermarket brake light switch.
Connect the white wire to a suitable frame ground.
If your vehicle requires a battery disconnect to tow,
or if you are using an add-on brake light switch
you must connect the white wire to the negative
terminal of the towed vehicle’s battery.