50 / EN
Washing Machine / User’s Manual
1888
88:88
88
C
0
Changing the programme selection after programme has started:
The programme change is not allowed when the current programme is running.
You can select the new programme after switching the current programme to pause mode.
C
The selected program starts anew.
Changing the auxiliary function, speed and temperature
Depending on the step the programme has reached, you can cancel or activate the auxiliary functions. See,
"Auxiliary function selection".
You can also change the speed and temperature settings. See, "Spin speed selection" and "Temperature
selection".
C
The loading door will not open if the water temperature in the machine is high or the water level is above the door opening.
4.3.13 Child Lock
Use Child Lock function to prevent children from tampering with the machine. Thus you can avoid any changes
in a running programme.
C
You can switch on and off the machine with On / Off button when the Child Lock is active. When you switch on the machine
again, programme will resume from where it has stopped.
When the child lock is enabled, an audio warning will be given if the buttons are pressed. Audio warning will be canceled if the
buttons are pressed 5 times consecutively.
To activate the Child Lock:
Press and hold
Auxiliary Function button 2
for 3 seconds. After the countdown as “
CL 3-2-1
" on the
display is over, "CL On" appears on the display. Release
2nd Auxiliary Function button
when this warning is
displayed.
To deactivate the childproof lock:
Press and hold
Auxiliary Function
button 2 for 3 seconds. After the countdown as
“CL 3-2-1”
on the display
is over, "CL On" disappears from the display.
4.3.14 Cancelling the programme
The programme is cancelled when the machine is turned off and on again. Press and hold
On / Off
button for
3 seconds. After the countdown as "3-2-1" on the display is over, the machine turns off.
C
If you press On / Off button when the Child Lock is enabled, the programme will not be cancelled. You should cancel the Child
Lock first.
If you want to open the loading door after you have cancelled the programme but it is not possible to open the loading
door since the water level in the machine is above the loading door opening, then turn the Programme Selection knob to
Pump+Spin programme and discharge the water in the machine.
4.3.15 End of programme
End symbol appears on the display when the programme is completed.
If you do not press any button for 10 minutes, the machine will switch to OFF mode. Display and all indicators
are turned off.
Completed programme steps will be displayed if you press On / Off button.
4.3.16 Adjusting the VOLUME level
Low volume and high volume
Press and hold Auxiliary Function button 3 for 3 seconds to adjust the volume level. After the countdown as
"3-2-1" on the display is over, the volume level symbol will appear and the new volume level will be displayed.