background image

 

 

 

 

 

 

 

 

 

 

 

         EN

 

 

 

 

READ THE INSTRUCTIONS 

Attention! 

You are advised to read all the instructions in this manual carefully; it will inform you about 
the right conditions for the proper, safe use of your washer-dryer 
It is very important to keep this instruction manual with the appliance for future reference. 
In  the  event  of  sale  or  transfer,  ensure  that  the  manual  always  accompanies  the  appli-
ance, to provide the necessary information about its use. 

 
 

1. PRECAUTIONS FOR SAFETY AND USE  

 

Attention! 

These precautions are detailed for reasons of safety. 
This section must be read carefully before installation and use.  

 

Disposing of packaging 

 

Never leave packaging residues unattended in the home. Separate waste packaging materials by 
type and consign them to the nearest recycling centre. 

 

Packaging materials (plastic bags, polystyrene, etc.) must not be left within reach of children. 

 

Disposing of old appliances 

 

Once  no  longer  in  use,  appliances  must  be  rendered  unusable:  permanently  disarm  the 
lock on the door (this will prevent children risking their lives by locking themselves inside 
during play) and cut the power supply lead after removing the plug from the socket. 
The appliance must be delivered to a recycling facility. 

 

Environmental protection 

 

Use  the  whole  of  the  maximum  recommended  capacity.  Never  exceed  the  maximum  permitted 
load. 

 

Do not use the prewash function for lightly or normally soiled items. 

 

Follow the manufacturer's recommendations on detergent usage. 

 

Use  the  highest  spin  speed  permitted  for  the  fabric  type.  Fast  spins  reduce  the  drying  time  and 
thus energy consumption. 

 

Safety instructions 

 

This  appliance  is  intended  for  domestic  use  and  is  compliant  with  Directives  72/23/EEC  and 
89/336/EEC (including Directives 92/31/EEC and 93/68/EEC) currently in force. 

 

Read all the instructions in this manual carefully before installation and use.  

 

Check that the drum assembly has been released before use (see instructions). Failure to release 
the drum assembly may cause damage to the washer-dryer and the surrounding furniture or appli-
ances during the spin cycle. 

 

This Instruction Manual is an integral part of the appliance: it must always be kept intact with the 
appliance. Installation must be carried out by qualified staff in compliance with the relevant regula-
tions.  The  appliance  is  built  to  provide  the  following  functions:  washing  and  drying  of  clothes  or 
fabrics stated to  be suitable for machine  washing by  the producer on the relevant label.  All other 
uses are to be considered improper. 

The manufacturer declines all liability for uses other than 

those stated above.

 

 

The nameplate with the technical data, serial number and mark is in a visible position in the part in 
view after the door has been opened. 

The nameplate must never be removed.

 

 

The electrical and plumbing works required to install the appliance must only be carried out 
by skilled staff. 

 

The appliance must be connected to earth in compliance with electrical system safety regulations. 

The manufacturer declines all liability for direct or indirect injury or damage deriving from a 
non-existent or defective earth connection. 

 

In the event that the appliance is not connected by means of a plug, an omnipolar circuit-breaker 
device with contact gap of at least 3 mm must be provided. 

 

The  plug  to  be  connected  to  the  power  supply  lead  and  the  relative  socket must  be  of  the  same 
type and comply with the relevant regulations. Check that the mains voltage and frequency are the 

Содержание WDF6127-1


























Отзывы: