User instructions
32
TABLE FOR CERTIFICATION BODIES
Reference standard
EN 50242
Reference program
Selector on
3
+
ECO 55°C
button
Load
12 place-settings
Type of detergent
B
Amount of detergent
30 g
Rinse aid setting
Depending on the model 3/4 or 4/6
EN 50242
3.2 Washing
programs
Before starting a washing program make sure that:
•
The water supply tap is
open.
•
The
correct amount of detergent
has been added to the
dispenser
.
•
The baskets have been
correctly loaded.
•
The spray arms are able to
rotate freely
and without obstruction.
•
The dishwasher door is
securely closed
.
HALF LOAD WASH SETTING
This function is especially suitable for loads up to
6 place settings
and allows saving of water and
electricity. It is controlled by the
HALF LOAD
button
(4)
(see section "3. Description of the
controls") and allows washing in the upper basket only.
IMPORTANT:
at the end of the program remember
to deactivate the function
to ensure the next
wash is not also carried out in half load mode
by mistake
.
A cutlery basket can be placed in the
upper basket
, while the
lower basket must be left empty.
CAUTION: there is no point in loading dishes and cutlery in the lower basket, since the jet of
water will only reach the upper basket.
CANCELLING THE CURRENT PROGRAM
To cancel the program in progress the dishwasher must be switched off by pressing the
ON/OFF
key
(3)
(see section "3. Description of the controls").
Turn the program selector to
SOAK
and wait for the dishwasher to start. On completion of the
program, switch off the dishwasher by pressing the
ON/OFF
key
(3)
.
