Smeg UD516DSUK, Перевод оригинальной инструкции

Страница: 32 / 37

32
12 MAINTENANCE AN CLEANING
We recommend regular servicing by a SMEG authorised service centre at least once a year, to
guarantee optimal performance at all times.
Consumables (e.g. peristaltic pump hoses) and/or parts subject to wear and tear must be replaced
with genuine SMEG parts.
N.B.: the manufacturer accepts no liability for wilful damage or damage deriving from
carelessness, neglect, failure to comply with instructions, regulations and standards or incorrect
connections, which lead to forfeiture of warranty cover.
Remove the filters (simply lift them out as shown here), taking
care that no large residues fall into the sump underneath. Clean
them to remove residues and rinse with plenty of water, then put
them correctly back in place; do not use sharp or pointed tools.
Clean away any limescale deposits to prevent excessive build-ups;
If possible, leave the hood or door ajar when not in use;
Clean surfaces thoroughly and often with a damp cloth; use
neutral, non-abrasive detergents which do not use chlorine
compounds, which corrode and damage stainless steel.
Do not use the products mentioned above even when cleaning the floor underneath or in the vicinity
of the dishwasher, to ensure that fumes or drops cannot damage the steel surfaces.
The dishwasher has IPX4 protection, but the use of direct water jets for cleaning is
forbidden.