Cleaning and maintenance
95
EN
Installing and removing the seal
To remove the seal:
• Unhook the clips in the 4 corners then
pull the seal outwards.
To refit the seal:
• Hook the clips in the 4 corners onto the
seal.
Seal maintenance tips
The seal should be soft and elastic.
• To keep the seal clean, use a non-
abrasive sponge and wash with
lukewarm water.
What to do if...
The appliance does not work:
• The switch is defective: check the fuse
box to see whether the switch is in
working order.
• Loss of power: check that the appliance
indicator lights are operational.
The gas burner does not light:
• Loss of power or moisture in the igniters:
light the gas burner with a lighter or
match.
The oven does not heat up:
• Defective fuse: check and replace the
switch if necessary.
• The function knob has not been set: set
the function knob.
All food prepared in the oven cavity burns
within a short time:
• Defective thermostat: contact an
Authorised Service Centre
The door glass mists up when the oven is
hot:
• Completely normal behaviour caused by
the difference in temperature which has
no effect on the oven’s performance.
The display is completely off:
• Check the mains power supply.
• Check that any circuit breaker/switch
upstream of the appliance power supply
connection is in the “ON” position.
If the problem has not been
resolved or in the case of other
types of fault, contact your local
technical support centre.