Cleaning and maintenance
78
3. To reassemble the door, put the hinges
in the relevant slots on the front of the
oven, making sure that the grooved
sections
(A)
are resting completely in
the slots. Lower the door and once it is
in place remove the pins from the holes
in the hinges.
Cleaning the door glazing
The glass in the door should always be kept
thoroughly clean. Use absorbent kitchen
roll. In case of stubborn dirt, wash with a
damp sponge and an ordinary detergent.
Removing the internal glass panes
1. Remove the internal glass pane by
pulling the rear part gently upwards,
following the movement indicated by
the arrows (
1
).
2. Then, pull the front part upwards (
2
).
This way, the 4 pins attached to the
glass detach from their housings in the
oven door.
3. Remove the intermediate glass pane by
lifting it upwards.
We recommend the use of
cleaning products distributed by
the manufacturer.
