Installation
43
EN
Installing the upstand (on some models only)
The upstand must always be positioned and
secured correctly on the appliance.
1. Unscrew the 2 nuts (
B
) on the back of the
hob.
2. Position the upstand above the hob,
taking care to align the pins (
C
) with
the holes (
D
).
3. Secure the upstand to the hob by
tightening the screws (
A
).
5.4 Electrical connection
The upstand provided is an
integral part of the product. It must
be fastened to the appliance prior
to installation.
Power voltage
Danger of electrocution
• Have the electrical connection
performed by authorised technical
personnel.
• Use personal protective equipment.
• The appliance must be connected to
earth in compliance with electrical
system safety standards.
• Disconnect the mains supply.
• Do not pull the cable to remove the
plug.
• Use cables withstanding a temperature
of at least 90°C.
• The tightening torque of the screws of
the terminal board conductors must be
1.5 - 2 Nm.
Содержание SUK62MX8
Страница 44: ...914778752 C ...
