User instructions
20
SPREAD HALF LOAD
Suitable when there are not many dishes to be washed, it saves energy
and reduces the program duration. Place dishes in both baskets then load
the detergent dispenser than less than the normal amount for a full load.
Flexi Tabs
Specifically for washing with combination detergents in
tablets
, which also
contain
salt and rinse aid
(3in1) or other agents such as glass protector,
steel rinse aids, etc. (4in1, 5in1…). When this option is selected, salt and
rinse aid will not be dispensed even if the relative compartments contain
them. If the containers are empty, the
lights
will remain
on.
If the option is not provided, we recommend the use of conventional
products (separate detergent, salt and rinse aid), because with
conventional washing cycles, combined products might create problems
such as a white deposit, poor drying results and residues left on dishes.
For further information, refer to the detergent pack.
IMPORTANT:
when no longer required, the option must be
deactivated
by pressing the
relative
button
(the light goes out).
These products
are not suitable
for use with
excessively “hard”
water.
If the hardness level set is higher than
H3
, when the option is activated
the relative light flashes to indicate that the product is being used
incorrectly; the dishwasher
will still work
, but washing results may be
poor
.
DELAYED START
The start of the washing program can be delayed to program the dishwasher
to operate at the preferred time of day (e.g. overnight). Press the
PROGRAM DELAY
button to activate the option and display a
1 hour
delay. Keep pressing to select the delay required, which may be
up to 9, 12
or 24 hours depending on the model.
When the door is closed, the appliance will prewash the dishes, after
which the "program delay" set will come into effect.
Содержание STP533L
Страница 2: ......