User instructions
18
OPTION SELECTION
Options are selected by pressing the relative button by the symbol of the
option required; the light comes on to confirm that the option has been
activated.
It is not possible
to select any options when the
soak program
is being used.
All options
except "Flexi Tabs"
are
disabled
at the end of the
wash cycle. To
disable the “Flexi Tabs” option, press
the
relative button (the light goes out).
All options, including
"Flexi Tabs"
are
disabled when a program
is
CANCELLED
after it has begun.
ADDITIONAL OPTIONS
Some models feature additional options, activated by
pressing two
buttons simultaneously
. In this case, two lines in the control panel
graphics link the symbol of the additional option to the two buttons to be
pressed simultaneously to enable it. (e.g.
“Flexi Tabs”
in this illustration)
QUICK TIME OPTION
Select this option together with any washing program (except the soak
program) to
SHORTEN
the cycle. To activate this option, press button (light
comes on) after selecting the program required.
The option is automatically deactivated at the end of the program.
SPREAD HALF LOAD
Suitable when there are not many dishes to be washed, it saves energy
and reduces the program duration. Place dishes in both baskets then load
the detergent dispenser than less than the normal amount for a full load.
ENERSAVE OPTION
This option further
reduces
energy
consumption by opening the door at
the end of the cycle for more effective drying. At the end of the wash an
automatic device releases the door, which slowly opens by a few
centimetres. This allows optimal drying even with low rinsing
temperatures, for significant
energy saving
.
The dishwasher remains in an
idle state
between the rinse stage and the
end of the cycle to allow proper drying. Opening the door at this stage
causes the cycle to
stop
and
ends
the program.
The program end is signalled by a short beep and the flashing of the
indicator lights for programs 4 and 5.
