SWITCHING OFF
The end of the washing program is signalled by a short intermittent beep and the
appearance of
“P0”
on the
DISPLAY.
ANNULLING THE PROGRAM IN PROGRESS
To annul the program being carried out, after opening the door select program "
P0
".
When the door is closed the dishwasher will skip to the end of the program.
MODIFYING THE PROGRAM
To modify the current program, after opening the door select the new program.
When the door is closed the dishwasher will start the new program automatically.
DELAYING THE PROGRAM
The start of the washing program can be delayed from a
minimum
of
1 hour
to a
maximum
of
9 hours
; this allows you to operate the dishwasher at the time of day of
your choice.
When the
DELAYED START
button
(3)
is pressed, the
DISPLAY (7)
will show first the
duration of the program set and then the number of hours (9,8, …1) of delay with which
it is to be started.
The
symbol will remain until the start of the washing cycle, while the number of hours
will disappear automatically if the keypad is not used for 5 seconds or if any other button
except the
DELAYED START
button
(3)
is pressed.
When the door is closed the dishwasher will perform a pre-wash, after which the
“program delay” set previously will start. To check the time left before the program
starts, simply press the corresponding button once.
If it is necessary to open dishwasher door during the washing cycle, there
will be a
1-minute delay
before the program can be resumed.
After correctly closing the door, the washing program will start again from
where it was interrupted. This operation may negatively affective the
progress of the washing cycle.
TABLE FOR CERTIFICATION BODIES
Reference standard
EN 50242
Reference program
(*)
BIO
program
(5)
Load
14 place-settings
Type of detergent
B
Amount of detergent
30 g
Rinse aid setting
Depending on the model 3/4 or 4/6
EN 50242 STANDARD LOADS
LOWER BASKET
UPPER BASKET
The cutlery basket disposes of an
exclusive system
of indipendent
sliding flap
inserts
; some combinations permit to make the best of the available space.
Vertical
inserts
Horizontal
insert
open
Horizontal
insert closed
Movement required
to extract the inserts
Содержание STA647
Страница 1: ...INSTRUCTION MANUAL DISHWASHER...
