Smeg ST4523IN, Руководство пользователя

Страница: 10 / 28

Programme
1) 2)
Water (l) Energy (kWh) Duration (min)
9.3 - 11.4 0.772 - 0.944 90
9.4 - 11.5 0.876 - 1.071 160
9.9 0.754 240
8.3 - 11.5 0.677 - 1.036 120 - 170
Self Clean 8.3 - 10.1 0.593 - 0.725 60
1) The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of
dishes and the degree of soil can change the values.
2) The values for programmes other than ECO are indicative only.
Information for test institutes
To receive the necessary information for
conducting performance tests (e.g.
according to: EN60436 ), contact the
manufacturer.
In your request, include the model from
the rating plate.
BASIC SETTINGS
You can configure the appliance by
changing basic settings according to your
needs.
Num‐
ber
Settings Values
Description
1)
1 Water hard‐
ness
From level 1L
to level 10L
Adjust the level of the water softener ac‐
cording to the water hardness in your area.
Factory setting: 5L.
2 Rinse aid level From level 0A
to level 8A
Adjust the level of the rinse aid according to
the necessary dosage.
Factory setting: 5A.
3 End sound 1b (on)
0b (off)
Activate or deactivate the acoustic signal for
the end of a programme.
Factory setting: 0b.
4 Auto door
open
1o (on)
0o (off)
Activate or deactivate the Dry Assist.
Factory setting: 1o.
5 Key tones 1F (on)
0F (off)
Activate or deactivate the sound of the but‐
tons when pressed.
Factory setting: 1F.
10