Smeg ST149, Инструкция по эксплуатации

Страница: 14 / 44

User instructions
13
DURATION CONSUMPTION
NUMBER &
PROGRAMME
LOAD CROCKERY
AND CUTLERY
PROGRAM
PROGRESS
MINUTES WATER
LITRES (1)
POWER
KWh (2)
1
SOAK
Pans and dishes awaiting
completion of the load
Cold prewash (***) 6 0,03
2
LIGHT
Delicate dishes with light
dirt.
Wash at 45°C
Cold rinse
Rinse at 50°C
Dry
(***) 12 1,00
3
BIO (*)
EN 50242
Dishes with normal dirt,
washed immediately after
use.
Cold prewash
Wash at 50°C
Cold rinse
Rinse at 62°C
Dry
180’ (**) (**)
4
AUTO
60- 70
Pans and dishes with
normal dirt, even with
dried-on residues.
Cold prewash
Wash at 50°C
Wash at 65°C
Cold rinse
Rinse at 70°C
Dry
(****) (****) (****)
5
ULTRA
CLEAN
Very dirty pans and dishes,
washed immediately after
use.
Prewash at 45°C
Wash at 70°C
2 cold rinses
Rinse at 70°C
Dry
(***) 18 1,72
Only run the soak program with partial loads.
The EXTRA HYGIENE, DELAYED START, HALF LOAD and "3/1" (detergent)
options cannot be used with the soak program.
(*) Reference program as per EN 50242 standard.
(**) See energy label. (***) See display.
(****) When the "
AUTO
60-70 " program is selected, the dishwasher recognises the
type of dirt and automatically adjusts the washing parameters as appropriate.
The "ULTRA CLEAN" programs and the programs for which the EXTRA HYGIENE
option is set terminate with an additional anti-bacteria rinse that ensures a further
reduction in the bacteria level. If the temperature falls during this stage of the
program (e.g. because the door is opened or due to a power blackout),
“EXTRA
HYGIENE” flashes on the display at the end of the wash cycle to warn that the anti-
bacteria effect is not guaranteed.
(1) Average power consumption level 2 .
(2) The cycle duration, energy consumption and temperatures which appear on the
display may vary depending on water and room temperature and type and
quantity of dishes.
The washing cycle will not take place if the dishwasher door is left open
or not properly closed.