
33
Instructions for the installer
Make the connection to the gas mains using a rubber hose
whose specifications comply with the current regulations
(verify that the reference standard is stamped on the hose).
Carefully screw the hose connector
3
to the appliance’s gas
connector
1
(1/2” thread ISO 228-1), placing the seal
2
between them. The hose connector
4
can also be screwed to
the hose connector
3
, depending on the diameter of the gas
pipe used. After having tightened the hose connector(s), push
the gas pipe
6
onto the hose connector and secure it with the
clamp
5
that is compliant with the regulations in force.
11.3.2Connection with a flexible steel hose
WARNING: The following instructions are valid for all types of installation , see fig. A, B, C in
chapter “11.1 Installing in kitchen units”.
Only use standards-compliant continuous wall steel hoses no longer than 2 metres.
This type of installation can be used for both built-in and free-standing appliances.
Make the connection to the gas mains using a continuous wall flexible steel pipe
whose specifications comply with the regulations in force.
Carefully screw the connector
3
to the appliance’s gas connector
1
(1/2” thread ISO
228-1), placing the seal
2
between them.
3
2
1
4
3
6
5
2
1
3